Hobby Motor Inertia Dyno SKU: MD1-90AL-A145A-540
Available on backorder
This is a universal benchtop inertia motor dynamometer (dyno) that measures the rpm, Kv (rpm/voltage), voltage, current draw, power and torque output of a electric motor. This dyno is great tool for motor analysis, ESC (boost) adjustment, brushless sensor adjustment, gearing calculation, etc. The dyno is coupled to a motor holder via a pulley and belt to accelerate the inertial mass. We will call this a ‘flywheel’ for simplicity. Our data acquisition electronic board takes the flywheel’s inertia (resistance of an object to a change in its state of motion), measures the rate it takes to accelerate and calculates the output power and torque of the tested motor. Our dyno repeatedly measures and calculates power in small increments to produce an accurate graph on a PC of the engine’s power characteristics.
Precise, otherwise known as “Repeatability” is what you want in a dyno, that means test the same electric motor time after time and get the same results. Our dyno is capable of repeatable test results using the ESC/Throttle Controller Board (Sold Separately).
The dyno uses a high speed data adquisition board with a build Optical RPM sensor, delivering low noise and accurate readings. It features a built-in micro USB for connection to your PC. It includes one external LCD port, one external I.R Temp port, one current and voltage sensor port, and two temperature sensor ports.
The dyno uses a high quality 6061 aluminum frame cover around the flywheel to protect from high rpm speeds produced by your motors. Yet we still offer the ability to see the flywheel spinning action by adding a clear window screen. In addition, a clear Plexiglas shield covers the belt to protect from possible belt breakage.
FLYWHEEL (VARIABLE LOAD)
The dyno uses the engine to simply accelerate a flywheel (variable load). We calculate the mechanical power and mechanical torque of the motor by knowing the flywheels inertia (resistance of an object to a change in its state of motion) and it’s acceleration. We offer different sizes and materials to best suit your motor application. Additional flywheels can be purchased separately.
Screw into baseboard to securely fasten the dyno. Screw #3 is optional.
We offer different size of motor holders to test in the dyno. For more information in the dimensions, please check the drawing section.
A pulley is installed in the test motor to includes two size of pulleys: 3.175mm, and 5mm bore to use with Outrunner and 540/550 sized motors. Additional size pulleys can be purchase separately.
PREMIUM BALL BEARINGS
The flywheel incorporates a set of 2 high-speed, black-sealed, steel ball-bearings throughout the assembly to ensure low friction and maximum efficiency. Optional ceramic bearings can be purchased separately.
- (1) Hobby motor inertia dyno with customer’s selected flywheel
- (1) Voltage and current sensor based on customer’s selection
- (1) Motor mount based on customer’s selection
- (1) Pulley for 3.175mm motor shaft
- (1) Pulley for 5mm motor shaft
- (1) Micro-B USB cable
- (1) Software license key (software updates are sold separately)
- Allen: 1.5mm, 2.0mm
- Phillips Screw Driver
- Soldering Iron
- Test Motor
(Based on your selected motor mount)
- Electronic speed controller (ESC)
- Battery to power ESC and motor.
- ESC Controller
(Not Required if using ESC/Throttle Controller Sensor)
- Windows PC with 1 USB Port
(Two USB ports are required when using the ESC/Throttle Controller Sensor)
BLACK KNIGHT RC “CARBON MAFIA” CARBON FIBRE ENGINE MOUNT BRACE RH SIDE 650081$18.50
or 4 payments of $4.63 with Afterpay
CY / RC 28mm Crankshaft – dd304$55.50
or 4 payments of $13.88 with Afterpay
MadMax Complete Front & Rear Suspension Arm Set for HPI Baja 5B/5T/5SC – TT221$69.50
or 4 payments of $17.38 with Afterpay
ROVAN 45CC 2WD Truck 1/5 5TS-MAX$1,499.00 – $1,599.00
or 4 payments from $374.75 with Afterpay